I/O Connectors: 1.5 mm SHS Headers & Harness Connectors

1.5 mm SHS Headers

Features | Part Numbers

Introduction

SHS is a complete line of sealed rugged I/O connectors. This product family is designed to perform on electronic control modules that function in extreme environmental conditions commonly found on commercial and off-road vehicles and industrial equipment. Cinch 1.5mm SHS system is the base interconnect technology

Features

18, 30, 48 and 60 I/O Headers

  • Rugged ECU interconnect
  • Available in various color/keying configuration
  • Interface to industry standard harness connectors
  • Epoxy sealed terminals optimizes sealing characteristics
  • Silicone interface seals and panel gasket
  • Center threaded mating bushings
  • Available with or without inductive ferrite filter

 

Materials

  • Insulator: PBT 30% Glass Filled
  • Pins: Brass with tin-lead over nickel plating (post plate)
  • Contact Cinch for RoHS compliant headers

Electrical

  • Current: 10 Amp @ 85°C
  • Contact resistance: < 10 m Ω
  • Insulation resistance: > 5000 m Ω @ 500VDC
  • Dielectric Withstanding Voltage: 1000 VAC – No breakdown

Environmental

  • Temperature: -40°C to +125°C
  • Sealing: IP 65, IP66, IP67, IP69
  • Vibration/Shock: 10-2000-10 Hz, 15 g's for 24 hrs – 8 hrs each perpendicular axis
  • Current Cycling: 500hrs at rated current (45 min ON – 15 Min OFF)
  • Temperature Life Test: 1000 hrs @ 125°C – 1000 hrs @ 85°C with current applied
  • Temperature / Humidity Cycling: 1000 hrs between -40ºC and +125ºC with relative humidity of 0 to 85%
  • Salt Spray: 96 hrs @ 5% NaCl
  • High Pressure Wash: 200ºF steam / detergent spray at 200psig for 30 sec. – 100ºF water / detergent spray at 750 psig for 30 sec.
  • Above performances with Cinch SHS Headers mated to Cinch SHS Harness Connectors

back to top


SHS Header Part Numbers and PDF Drawings

Part Number Drawing I/O Color Filter
581 01 18 001 Download the PDF 18 Black Yes
581 01 18 002 Download the PDF 18 Natural Yes
581 01 18 011 Download the PDF 18 Black No
581 01 18 012 Download the PDF 18 Natural No
581 01 30 001 Download the PDF 30 Grey Yes
581 01 30 002 Download the PDF 30 Black Yes
581 01 30 011 Download the PDF 30 Grey No
581 01 30 013 Download the PDF 30 Black No
581 01 48 001 Download the PDF 48 Black Yes
581 01 48 002 Download the PDF 48 Natural Yes
581 01 48 003 Download the PDF 48 Grey Yes
581 01 48 011 Download the PDF 48 Black No
581 01 48 012 Download the PDF 48 Natural No
581 01 48 013 Download the PDF 48 Grey No
581 01 60 001 Download the PDF 60 Black Yes
581 01 60 002 Download the PDF 60 Natural Yes
581 01 60 011 Download the PDF 60 Black No
581 01 60 012 Download the PDF 60 Natural No

1.5 mm SHS Harness Connectors

Features | Part Numbers | Assembly & Application Tooling

Features

18 and 30 position

  • Interface to industry standard ModICE® and SHS header connectors
  • Available in various color/keying configurations
  • Push to Seat technology
  • Integral secondary lock
  • Protected grommet wire seal
  • Threaded jackscrew mating

Materials

  • Insulator: PPA 30% Glass Filled
  • Grommet: Silicone
  • RoHS Compliant

Electrical

  • Current: 10 Amp @ 85°C
  • Contact resistance: < 10 m Ω
  • Insulation resistance: > 5000 m Ω @ 500VDC
  • Dielectric Withstanding Voltage: 1000 VAC – No breakdown

Environmental

  • Temperature: -40ºC to +125ºC
  • Sealing: IP65, IP66, IP67, IP69
  • Vibration/Shock: 10-2000-10 Hz, 15 g's for 24 hrs – 8 hrs each perpendicular axis
  • Current Cycling: 500hrs at rated current (45 min ON – 15 Min OFF)
  • Temperature Life Test: 1000 hrs @ 125ºC – 1000 hrs @ 85ºC with current applied
  • Temperature / Humidity Cycling: 1000 hrs between -40ºC and +125ºC with relative humidity of 0 to 85%
  • Salt Spray: 96 hrs @ 5% NaCl
  • High Pressure Wash: 200ºF steam / detergent spray at 200psig for 30 sec. – 100ºF water / detergent
  • spray at 750 psig for 30 sec.

Above performances with Cinch SHS Headers mated to Cinch SHS Harness Connectors.

back to top


SHS Harness Connector Part Numbers and PDF Drawings

Part Number Drawing Description  
425 00 00 872 Download the PDF Terminal 20 AWG GXL – 18AWG TXL
425 00 00 873 Download the PDF Terminal 18 AWG GXL – 16 AWG GXL& TXL
581 00 00 011 Download the PDF Seal Plug  
581 00 00 100 Download the PDF Backshell 30 Position Black
581 00 00 101 Download the PDF Backshell 18 Position Black
581 01 18 023 Download the PDF 18 Position Connector Black
581 01 18 024 Download the PDF 18 Position Connector Natural
581 01 30 027 Download the PDF 30 Position Connector Gray
581 01 30 028 Download the PDF 30 Position Connector Black
581 01 30 029 Download the PDF 30 Position Connector Black
581 01 30 030 Download the PDF 30 Position Connector Natural
581 01 30 031 Download the PDF 30 Position Connector Natural

back to top


SHS Harness Connector – Assembly Instructions and Tooling

Part Number Drawing Description  
5991111615   Hand Crimp Tool For 4250000872
5991111616   Hand Crimp Tool For 4250000873
5991111621 Download the PDF Applicator For 4250000872
5991111622 Download the PDF Applicator For 4250000873
5991111623 Download the PDF Punch/Anvil kit For 4250000872
5991111624 Download the PDF Punch/Anvil kit For 4250000873
5991111628   Secondary Lock removal Tool (Tweezer) For 18 and 30 pos. Connector
5810118920   Terminal Removal Tool For 18 and 30 pos. Connector
  Download the PDF SHS Crimp Specification  
  Download the PDF SHS Assembly Instructions  

SHS
SHS