Introduction | Features | Performance Data | NX Sales Drawings and Part Numbers

SAS Cable Introduction

Cinch designs and manufactures high speed cables for SAS (Serial Attached SCSI) incorporating the industry standard SFF8470 interface.

Recognizing the need to minimize discontinuities in the cable termination area, NX Cables utilize laser welded, direct attach termination of the twin-ax conductors to the cable connector contacts, eliminating the discontinuities associated with the commonly used paddle card.

Coupled with a unique ground shield between the waferized pairs, NX Cables provide the lowest loss interconnect available today in the SFF8470 form factor with less than 2% cross talk.

Cinch’s advanced manufacturing technique and wafer construction provides superior signal fidelity over long distances.

NX CX4 Cables are available in wire gauges including 24, 26, 28 and 30 AWG in lengths from 0.50m 30AWG to 17m 24AWG with the industry’s largest selection of backshell options.

Ask your local Cinch Connectors sales representative or click here to request quotations and testable cable samples.

back to top

SAS Cable Features

• Laser welded direct attach termination
• 24AWG through 30AWG
• Standard jackscrew
• 4X connector widths

back to top

Performance Data for SAS Cables

*Lengths based on actual testing and port to port performance using outermost port (worst case) switch to switch. Longer lengths can be used when connecting switch to HBA.

Electrical Performance

• Differential Impedance: 100 ±10? @ 100psec rise time
• Near End Crosstalk: <1.5% @ 50psec rise time with 4 aggressors
• S11: < or = -15dB to 5GHz (3m 28AWG cable)
• S21: < 10dB attenuation at 5HGz (3m 28AWG cable)
• CX4 PSXT: < or = 30dB @ 5GHz (3m 28AWG cable) sum of PSNEXT (3pairs) and PSFEXT(4 pairs)
• Eye pattern opening with Xtalk (3m 28AWG cable):
  • (2.5Gb/s): 372psec width x 600mV height

Mechanical Performance

• Complies with SFF8470 and SAS specifications
• Cable: Twinax, UL CL-2 or CM 24, 26, 28 and 30 AWG
• Operating Temperature range: -20°C to 75°C
• Durability: 250 cycles

back to top

NX Sales Drawings and Part Numbers

Additional cable lengths and backshell cable exits are available.
Click wire gauge column heading for sales drawing.

• 4X Straight Jackscrew (SAS)