Series 300 - With 180 Clamp w/Locks

Print This Page

Features | Part Numbers | Dimensions

Features

Solder lug terminals with .093″ x .062″ (2.36mm x 1.57mm) wiring holes.

Two-contact “Jones” connector is round, all others are rectangular.
For use in cable-to-panel and cable-to-cable applications.
Designed for light and medium duty.
Plug prongs are .156″ (3.96mm) wide and .047″ (1.19mm) thick.
Polarized to prevent wrong-way insertion.
Plugs have projecting flat blades, sockets have recessed twin bellows.
Cable clamps of zinc and clear irridite-plated steel used for strain relief.
RoHS version available
UL Recognized-file E170218 (UL 1977), E130965 (UL1863).
CSA-LR31996.

Materials

Insulation Material:
Molded monoblock, general purpose phenolic, black UL94V-1
Contact Material:
Plug: Brass Socket: Phosphor bronze
Contact Plating: Cadmium / RoHS - Matte Tin
Operating Temperature: Up to +105°C
Hood Material: UL 94V-0 rated thermoplastic

Electrical

Operating Voltage: 250 VAC RMS maximum
Current Rating: 10 Amps
Contact Resistance: 16 Milliohms maximum

Part Numbers

Click on any part number to see it’s current stock with our distributors.

No. of Contacts	Catalog No. Plug w/Lock	Catalog No. Socket w/Keeper
2	P-302-CCT-L	S-302-CCT-K
3	P-303-CCT-L	S-303-CCT-K
4	P-304-CCT-L	S-304-CCT-K
6	Discontinued	S-306-CCT-K
15	Discontinued	S-315-CCT-K
18	Discontinued	S-318-CCT-K
21	Discontinued	S-321-CCT-K
24	Discontinued	S-324-CCT-K
27	Discontinued	S-327-CCT-K
30	N/A	N/A
33	Discontinued	S-333-CCT-K

RoHS

No. of Contacts	Catalog No. Plug w/Lock	Plug Drawing	Catalog No. Socket w/Keeper	Socket Drawing
2	P-302H-CCT-L	Drawing	S-302H-CCT-K	Drawing
3	P-303H-CCT-L	Drawing	S-303H-CCT-K	Drawing
4	P-304H-CCT-L	Drawing	S-304H-CCT-K	Drawing
6	Discontinued		S-306H-CCT-K	Drawing

Dimensions

Dims

	A±.016		B±.016		C±.031		F		“D” Cable Opening
No. of Contacts	(.41mm)		(.41mm)		(.79mm)						Polarizing Pin
No. of Contacts	in	mm	in	mm	in	mm	in	mm	in	mm
2	.691	17.5	-	-	.953	24.21	.359	9.12	.375	9.53	–
3	1.034	26.26	.472	11.99	.953	24.21	.359	9.12	.313	7.94	–
4	.786	19.96	.724	18.39	.953	24.21	.469	11.91	.375	9.53	–
6	1.036	26.31	.724	18.39	1.078	27.38	.484	12.29	.438	11.13	–
8	–	–	–	–	–	–	–	–	–	–	–
10	1.592	40.44	.720	18.29	1.203	30.56	.500	12.70	.500	12.70	–
12	1.286	32.66	.974	24.74	1.203	30.56	.469	11.91	.563	14.30	–
15	1.795	45.59	1.100	27.94	1.850	46.99	.712	18.08	.563	14.30	NO
18	2.107	53.52	1.100	27.94	1.850	46.99	.712	18.08	.563	14.30	NO
21	2.420	61.47	1.100	27.94	1.850	46.99	.712	18.08	.625	15.88	NO
24	2.732	69.39	1.100	27.94	1.850	46.99	.712	18.08	.625	15.88	14
27	3.045	77.34	1.100	27.94	1.850	46.99	.712	18.08	.625	15.88	14
30	3.357	85.27	1.100	27.94	1.850	46.99	.712	18.08	.750	19.05	14
33	3.670	93.22	1.100	27.94	1.850	46.99	.712	18.08	.750	19.05	17

Mounting Dimensions

Dims

Reference	A		B		C		D
Reference	in	mm	in	mm	in	mm	in	mm
303	.453	11.51	1.016	25.81	.750	19.05	-	-
304	.719	18.26	.781	19.84	1.000	25.40	-	-
306	.719	18.26	1.031	26.19	1.000	25.40	-	-
308	.719	18.26	1.281	32.54	1.000	25.40	-	-
310	.719	18.26	1.578	40.08	1.000	25.40	-	-
312	.953	24.21	1.266	32.16	1.250	31.75	-	-
315-12	.953	24.21	1.516	38.51	1.250	31.75	-	-
315	1.016	25.81	1.641	41.68	1.375	34.93	-	-
318	1.016	25.81	1.953	49.61	1.375	34.93	.625	15.88
321	1.016	25.81	2.266	57.56	1.375	34.93	.469	11.91
324	1.016	25.81	2.578	65.48	1.375	34.93	.625	15.88
327	1.016	25.81	2.891	73.43	1.375	34.93	.781	19.84
330	1.016	25.81	3.203	81.36	1.375	34.93	.938	23.83
333	1.016	25.81	3.516	89.31	1.375	34.93	1.094	27.79

NOTE: For 300 Series 2 through 33 contact angle bracket connectors. All mounting holes are .156″ (3.96mm) dia. Maximum chassis thickness is .063″ (1.59mm) for bottom mounting. Mounting holes are located on center line unless otherwise shown.

Polarizing Patterns

Polarizing Patterns