Cinch Connectors: Creators of High Speed Cables, Duracon, Omega, and other high performance cables and connectors.
Stock Check | Cinch Portal | Bel Fuse Question for Cinch
 
 

Series 300 – With Flush Plate

Barrier Blocks

Related Items

Download Misc. Commercial Catalogue
Products » Electronic & Communication Systems » Jones / J Plugs and Sockets » Series 300 – With Flush Plate

Features | Part Numbers | Dimensions


Features


Solder lug terminals with .093″ x .062″ (2.36mm x 1.57mm) wiring holes.


  • Two-contact “Jones” connector is round, all others are rectangular.
  • For use in cable-to-panel and cable-to-cable applications.
  • Designed for light and medium duty.
  • Plug prongs are .156″ (3.96mm) wide and .047″ (1.19mm) thick.
  • Polarized to prevent wrong-way insertion.
  • Plugs have projecting flat blades, sockets have recessed twin bellows.
  • Cable clamps of zinc and clear irridite-plated steel used for strain relief.
  • UL Recognized-file E170218 (UL 1977), E130965 (UL1863).
  • CSA-LR31996.

Materials


  • Insulation Material: Molded monoblock, general purpose phenolic, black UL94V-1
  • Contact Material: Plug: Brass – Socket: Phosphor bronze
  • Contact Plating: Cadmium
  • Operating Temperature: Up to +105°C
  • Hood Material: UL 94V-0 rated thermoplastic

Mechanical


  • Operating Voltage: 250 VAC RMS maximum
  • Current Rating: 10 Amps
  • Contact Resistance: 16 Milliohms maximum

back to top


Part Numbers

Click on any part number to see it’s current stock with our distributors.

 


No. of Contacts Catalog No. Plug Catalog No. Socket
2 P-302-FP S-302-FP
3 P-303-FP S-303-FP
4 P-304-FP S-304-FP
6 P-306-FP S-306-FP
8 N/A N/A
10 P-310-FP N/A
12 P-312-FP N/A

NOTE: Not available in contact sizes 15-33.


back to top


Dimensions

Dims

 


No. of Contacts A B C D E Max.
in mm in mm in mm in mm in mm
2 2.063 52.40 1.250 31.75 1.750 44.45 - - .719 18.26
3 2.063 52.40 1.250 31.75 1.750 44.45 .938 23.81 .500 12.70
4 2.063 52.40 1.250 31.75 1.750 44.45 .688 17.46 .750 19.05
6 2.063 52.40 1.250 31.75 1.750 44.45 .938 23.81 .750 19.05
8 – – – – – – – – – –
10 2.563 65.10 1.750 44.45 2.250 57.15 1.500 38.10 .750 19.05
12 2.563 65.10 1.750 44.45 2.250 57.15 1.188 30.16 1.000 25.40

Panel Cut out Dimensions

 


  A B C
Reference in mm in mm in mm
303-FP .953 24.21 .516 13.11 1.750 44.45
304-FP .703 17.86 .766 19.46 1.750 44.45
306-FP .953 24.21 .766 19.46 1.750 44.45
308-FP – – – – – –
310-FP 1.516 38.51 .766 19.46 2.250 57.15
312-FP 1.203 30.56 1.016 25.81 2.250 57.15

Mounting Dimensions


Dims

 


Reference A B C D
in mm in mm in mm in mm
303 .453 11.51 1.016 25.81 .750 19.05 - -
304 .719 18.26 .781 19.84 1.000 25.40 - -
306 .719 18.26 1.031 26.19 1.000 25.40 - -
308 .719 18.26 1.281 32.54 1.000 25.40 - -
310 .719 18.26 1.578 40.08 1.000 25.40 - -
312 .953 24.21 1.266 32.16 1.250 31.75 - -
315-12 .953 24.21 1.516 38.51 1.250 31.75 - -
315 1.016 25.81 1.641 41.68 1.375 34.93 - -
318 1.016 25.81 1.953 49.61 1.375 34.93 .625 15.88
321 1.016 25.81 2.266 57.56 1.375 34.93 .469 11.91
324 1.016 25.81 2.578 65.48 1.375 34.93 .625 15.88
327 1.016 25.81 2.891 73.43 1.375 34.93 .781 19.84
330 1.016 25.81 3.203 81.36 1.375 34.93 .938 23.83
333 1.016 25.81 3.516 89.31 1.375 34.93 1.094 27.79

NOTE: For 300 Series 2 through 33 contact angle bracket connectors. All mounting holes are .156″ (3.96mm) dia. Maximum chassis thickness is .063″ (1.59mm) for bottom mounting. Mounting holes are located on center line unless otherwise shown.


Polarizing Patterns