Cinch Connectors: Creators of High Speed Cables, Duracon, Omega, and other high performance cables and connectors.
Stock Check | Sales Portal | Bel Fuse Question for Cinch
 
 

Application Tools

Products » Electronic & Communication Systems » Miniature Ribbons » Application Tools

Features | Auto-Clinch Model 200S | Certi-Clinch Portable | Handi-Clinch | InstaLatch Unlatching Tool | Versa-Clinch Multi Function Hand Tool | Termination Repair Pliers

Features

A full range of tooling is available to make the use of Cinch Miniature Ribbon and SUPERIBBON? products as cost-effective as possible. From hand repair tools to the high production rate Auto-ClinchTM termination tool, Cinch has the tool to fit your needs.

back to top

Auto-Clinch Model 200S Termination Tool

Auto-Clinch is a semi-automatic Connector Termination Machine that terminates IDC connectors pair-by-pair. The basic machine comes equipped ready to terminate 50-position end-entry Miniature Ribbon or SUPERIBBON connectors, which it can do in approximately 1.5 minutes.

The Auto-Clinch is pneumatically powered and requires a min. 60psi air supply. It is electrically controlled, and requires a 117V, 60Hz Single Phase electrical circuit (5 Amps). Weight: 120 lbs. (54.48kg.), Dimensions: 25.5″ (64.77cm.) wide; 20″ (50.8cm) deep; 9″ (22.86cm) high. Note: These specifications may change with the addition of certain options.

Order Part No. AC-371

Several options are available that make the Auto-Clinch a versatile application tool:

  • Remote Visual Color Display shows wire color codes. It can be used to train new operators or to assist the operator in terminating non-standard wire sequences. Part No. ACO-482
  • The Selective Programmer allows the operator to set the machine to skip over positions that are not to be terminated, thus speeding up the termination process. Part No. ACO-495
  • The End-Entry Cable Clamp closer automatically closes the cable clamp on end-entry SUPERIBBON or SuperShield connectors as they are terminated. Part No. ACO-374 – A power assist for this device is also available. Part No. ACO-405
  • The Top-Entry Adapter dresses the wires during termination such that they are properly aligned for exit through a Top-Entry hood. Part No. ACO-218 – NOTE: Auto-ClinchTM cannot be equipped with both Cable Clamp Closer and Top-Entry Adapter simultaneously.
  • Insertion Blades are included for terminating solid wire. For replacement, order Part No. ACB-443 – To terminate stranded wire, order stranded-wire blades, Part No. ACB-872
  • Nests for Panel Mount and Top-Entry Ribbon Connectors, and All Plastic SUPERIBBON connectors allow the use of Auto-Clinch to terminate other IDC Ribbon Connectors

Ribbons

For All-Plastic IDC Connectors For Metal-Shell IDC Connectors
Panel Mount/Top-Entry
Connector Size End-Entry Top-Entry End-Entry Sockets Plugs Top-Entry Plug With Hood*
50 ACEN-853 ACTN-798 ACMN-484 ACMN-527 ACMN-858 ACMN-526
64 ACEN-570 ACTN-799 - - - -

* For Bail-Latch plugs with hood where hood forms rear of connector body, i.e., 77-32500.

For overmold kits, use panel mount/top-entry plug nests.

back to top

Certi-Clinch Portable Termination Tool

Certi-Clinch is a portable, manually operated tool that terminates Cinch all-plastic and metal shell Miniature Ribbon connectors with discrete-wire IDC contacts. It is designed for field use assembling cables on-site, yet is efficient enough to fit well into lower-volume factory assembly operations.

Its 10.5 lb. (4.77Kg) weight and versatile configuration make it readily portable for field use, and allow temporary use with virtually no setup time to handle peak demands in factory environments. The Certi-Clinch measures 6″ (15.24cm) wide x 13″ (33.02cm) long x 6.5″ (16.5cm) high.

Ribbons

Ordering Information, Certi-Clinch

Part No. Description
SCT-330 Certi-Clinch Tool with 25-pair nest, for Solid Wire
SCT-335 Certi-Clinch Tool with 32-pair nest, for Solid Wire
SCT-360 Certi-Clinch Tool with 25-pair nest, for Stranded Wire
SCT-342 Kit to convert 25-pair tool to 32-pair operation
SCT-343 Kit to convert 32-pair tool to 25-pair operation
SCT-645 Insertion Blades to convert 25-pair tool to Stranded Wire
SCT-038 Insertion Blades to convert 32-pair tool to Stranded Wire

back to top

Handi-Clinch Hand Termination Tool

This hand-operated tool terminates wires individually to Cinch SUPERIBBON? and metal shell Miniature Ribbon IDC connectors. Its integral nest holds the connector in place during use. Part No. HCTT-539

Ribbons

back to top

InstaLatch Unlatching Tool

While InstaLatches may be unlocked with something as simple as a center punch or ballpoint pen, this tool provides a ?hooked? end that allows you to unlock InstaLatches even in tight areas. Part No. UT-304

Ribbons

back to top

Versa-Clinch Multi Function Hand Tool

This versatile tool performs four basic functions in applying Cinch SUPERIBBON and metal shell Miniature Ribbon products:

  • Terminate individual wires to the IDC contact
  • Unlatch the hood for removal on end-entry SUPERIBBON products
  • Open and close the cable clamp on SUPERIBBON and SuperShield
  • Unlock InstaLatches to unmate connectors
  • Part No. VCTT-361

Ribbons

back to top

Termination Repair Pliers

These plier type tools allow you to rework misterminated cable assemblies and/or perform specialized termination operations. They terminate wires individually into Cinch IDC contacts. Repair Pliers for Standard Termination: Part No. SRT-345

Repair Pliers for Half-Tap (Daisy-Chaining) allows you to terminate one wire to multiple contacts to short contacts together, or even to two separate connectors to make back/back connections, etc. Part No. HT-560

Ribbons