RF & Microwave Tools

Cinch's RF & Microwave accessories offer high-performance solutions to optimize signal integrity and connectivity in your advanced communication systems.

Attribute Filters

Brand

Johnson

Midwest Microwave

Trompeter RF Connectivity

Vitelec Electronics

Description

3-Blade Cutter Head | .110 - .160 Diameter

3-Blade Cutter Head | .235 - .270 Diameter

3-Blade Cutter Head | .271 - .305 Diameter

3-Piece SMB, MCX- Contact Hand Crimp Tool (Frame Only)

3-Piece SMB, MCX- Contact Hand Crimp Tool (Positioner)

Blade for Center Conductor Pointing Tool

BNC Tester

BNC/TRB Cable Plug Removal Tool | Right Angle | 6"

BNC/TRB Cable Plug Removal Tool | Right Angle | 12"

BNC/TRB Cable Plug Removal Tool | Straight | 6"

BNC/TRB Cable Plug Removal Tool | Straight | 12"

Bushing for .086 OD Cable Conductor Pointing Tool

Bushing for .141 OD Cable Conductor Pointing Tool

Cable Clamp Inserts, .086 Semi-Rigid

Cable Clamp Inserts, .141 Semi-Rigid

Cable Stripping Tool Cassette | For Full Crimp BNC | Straight

Cable Stripping Tool | Battery Operated Coax

Cable Stripping Tool | No Cassette

Center Contact Positioner | For M22520/1-01 & TRS Series Connectors

Center Contact Positioner | For M22520/1-01 & TRS Series Connectors Pin TP837

Center Contact Positioner | For M22520/1-01 & TRS Series Connectors Socket (TP838)

Color Coded Sleeve | Black

Color Coded Sleeve | Black N Jack

Color Coded Sleeve | Green

Complete Center Conductor Pointing Tool for .086 OD Cable

Complete Center Conductor Pointing Tool for .141 OD Cable

Crimp Die | For CT5

Crimp Die | For CT5 1A-.178, 1B-.255

Crimp Die | For CT5, 1A-.213, 1B-.178

Crimp Die | For CT5, 290-.290, 255-.255

Crimp Tool | For 2021 N Types

Die for .047 in. dia. Flexible Cable, RG-178, RG-316, RG316DS and Contact Crimp w/stop

Die for RG-178, RG-316, RG316DS, RG-58, RG-142 LMR-100, LMR-195, LMR-200

Die for RG-179, RG-179DS, RG-59, 735A, LMR-240

Drive Tool for Security Termination TRM-244x-MS-SMA-02

F Panel Nut (Pkg of 50)

F Panel Nut (Pkg of 100)

F Panel Washer (Pkg of 100)

F Panel Washer Stainless Steel (Pkg of 100)

Frame for Center Conductor Pointing Tool

Ground Lug | For F-series (Pkg of 100)

Hand Crimp Tool Frame

Hand Crimp Tool | Center Contact | For Use With 75 Ohm BNC & Mini-Weco Pins

Hand Crimp Tool | Dies Sold Separately

HX1080 Signal Contact Removal Tool

Isolating Washer D Hole (11.70mm, 12.70mm)

Isolating Washer D Hole (14.70mm, 15.00mm)

Isolating Washer Type A (2.35mm, 7.92mm, 16.27mm)

Isolating Washer Type C (2.35mm, 5.72mm, 11.65mm)

Locational Positioning Soldering Tool for 1.85mm and 2.4mm Jacks

Locational Positioning Soldering Tool for 2.92mm Jacks

Locator Fixture for .086 OD Cable

Locator Fixture for .141 OD Cable

Locator Fixture for .250 OD Cable

Locator Fixture for Type N Plug Connectors

N Plug Dust Cap With Chain

Non Ratchet Crimp Tool | For F Series

Nut & Washer | For VBI/VBM/VBF Series (Pkg of 20)

Nut & Washer | For VBI/VBM/VBF Series (Pkg of 100)

Nut VBM/VBI/VBF Series (Pkg of 100)

Parallel Crimp Tool | For SMA/SMB

Precision Torque Wrench | 5 in-lbs | For SMA (Brass Connectors)

Precision Torque Wrench | 8 in-lbs | For 1.85mm, 2.4mm, 2.92mm, 3.5mm, SMA (Stainless Steel Connectors)

Precision Torque Wrench | 12 in-lbs | For Type N (Stainless Steel Connectors)

Ratchet Crimp Tool | 8.23/1.69

Ratchet Crimp Tool | BNC/TNC RG58

Ratchet Crimp Tool | For BNC & N Type

Ratchet Crimp Tool | For BNC/TNC | For Coaxial Connectors, 3.25 mm, 4.52 mm, 1.69 mm, HEX-Crimp.

Ratchet Crimp Tool | For BNC/TNC | For Coaxial Connectors, 5.41 mm, 6.48 mm, 1.69 mm, HEX-Crimp.

Semi Rigid Cable Vise Does not Include Inserts or Vise Stop

SMP Bullet Extraction Tool

SMP Cabled Connector Removal Tool

SMP Center Contact Holder

SMP FD Shroud Centering Tool

SMP Installation/ Removal Tool for Bullet Adapter

SMP Interface Locator Tool

SMP LD Shroud Centering Tool

SMP Right Angle Body Holder

SMP SB Shroud Centering Tool

SMPM Bullet Adapter Installation/Extraction Tool

SMPM Cabled Connector Removal Tool

SMPM Installation/ Removal Tool for Bullet Adapter

Solder Shim for .086 and .141 OD Cable

Solder Shim for .250 OD Cable

Soldering Mating Fixture for SMA Jack Connectors

Soldering Mating Fixture for SMA Plug Connectors

Stop Ccrew for Semi-Rigid Type N Jacks

Stop Ccrew for Soldering Device

Stripping Tool | 2 Blade | Strip Dimension 6mm

Stripping Tool | 2 Blade | Strip Dimension 6.8mm

Stripping Tool | 2 Blade | Strip Dimension 12mm

Stripping Tool | 3 Blade | Strip Dimension 3.8mm

Stripping Tool | 3 Blade | Strip Dimension 6mm

TNC Dust Cap with Chain

TPS/TCM/TRS/TTM Removal Tool | Straight | 6"

TPS/TCM/TRS/TTM Removal Tool | Straight | 12"

Type N Combination Hex Die Set, RG213, 214, LMR-400

UMC Inspection Tool for Cable Assembly

UMC Separation Key

Vise Stop (2.92 mm)

Washer | For VBM/VBI Series (Pkg of 100)

Weather Boot | For F Plug

Product	Product Type	Description
010-0041 Drawing	Contact Positioner	Center Contact Positioner \| For M22520/1-01 & TRS Series Connectors
010-0044 Drawing	Contact Positioner	Center Contact Positioner \| For M22520/1-01 & TRS Series Connectors Pin TP837
010-0045 Drawing	Contact Positioner	Center Contact Positioner \| For M22520/1-01 & TRS Series Connectors Socket (TP838)
010-0098 Drawing	Crimp Tool	Hand Crimp Tool \| Center Contact \| For Use With 75 Ohm BNC & Mini-Weco Pins
010-0133 Drawing	Tester	BNC Tester
125-0000-900 Drawing	Removal Tool	SMPM Cabled Connector Removal Tool
125-0000-901 Drawing	Extraction Tool	SMPM Bullet Adapter Installation/Extraction Tool
125-0000-906 Datasheet	Removal Tool	SMPM Installation/ Removal Tool for Bullet Adapter
127-0000-900 Drawing	Extraction Tool	SMP Bullet Extraction Tool
127-0000-901 Drawing	Removal Tool	SMP Cabled Connector Removal Tool
127-0000-902 Drawing	Contact Holder	SMP Center Contact Holder
127-0000-903 Drawing	Locator Tool	SMP Interface Locator Tool
127-0000-904 Drawing	Body Holder	SMP Right Angle Body Holder
127-0000-905 Drawing	Centering Tool	SMP FD Shroud Centering Tool
127-0000-906 Drawing	Centering Tool	SMP LD Shroud Centering Tool
127-0000-907 Drawing	Centering Tool	SMP SB Shroud Centering Tool
127-0000-910 Drawing	Removal Tool	SMP Installation/ Removal Tool for Bullet Adapter
128-0000-901	Separation Key	UMC Separation Key
134-0000-901 Drawing	Torque Wrench	Precision Torque Wrench \| 12 in-lbs \| For Type N (Stainless Steel Connectors)
134-1019-381 Drawing	Inspection Tool	UMC Inspection Tool for Cable Assembly
New Product 140-0000-903 Drawing	Soldering Mating Fixture	Locational Positioning Soldering Tool for 2.92mm Jacks
New Product 140-0000-904 Drawing	Soldering Mating Fixture	Locational Positioning Soldering Tool for 1.85mm and 2.4mm Jacks
140-0000-951	Hand Crimp Tool	Die for RG-178, RG-316, RG316DS, RG-58, RG-142 LMR-100, LMR-195, LMR-200
140-0000-952	Hand Crimp Tool	Hand Crimp Tool Frame
140-0000-953	Hand Crimp Tool	Die for .047 in. dia. Flexible Cable, RG-178, RG-316, RG316DS and Contact Crimp w/stop